Clean and TV on the first pass
When debris doesn't cause traction problems it is much easier to get down the line. No longer does an operator have to clean prior to TVing a line. Over time this translates to less wasted water and time.

Dual Bonded Jet Hose (no secondary cable to manage)
The unique hose design for the Jet Eye system allows for operators to focus on cleaning. The dual-bonded jet hose manages the cable for you along side the jet hose. Setting up with this unique hose makes setting up just as quick and easy as a normal jetting operation.

Digital Recording
All recording is managed on a Digital Video Recorder located in the cab of the chassis. A remote system allows the operator to control the DVR from the front of the truck without having to leave the control panel.

Interchangeable Skates for different size lines
Every situation is different when it comes to cleaning. The Jet Eye camera skates makes cleaning pipe from 6" to 48" possible.

Rugged Construction
All of the skate bodies and housings are machine milled from solid stainless steel or aluminum. Solid components like these are what make the skates rugged.

Screen at Operators Station
Operators never have to leave the control panel to know what is happening down in the line. Knowledge is empowering when dealing with collapsed pipe and infiltration in a sewer system. Operators can make better decisions knowing, not guessing, what is going on in the line.

What is a "Jet Eye Retrofit"?
The Jet Eye Retrofit is a Jet Camera system that replaces the existing hose currently installed on your Combo truck. This system allows the operator to see exactly what is going on in the line while the cleaning is occurring.

Can this system be installed on any combo truck?
Yes, the Jet Eye camera system can be installed on any truck with a compatible water system and hose reel. This system is shown above installed on a Vac-Con combination truck, but it can be installed on most Vactor, Camel, Aquatech, Gapvax, Vacall and Clean-Earth trucks.

How can this system double my production?
Typical jet operators have no idea of what is going on in the line while jetting. Every operator has a "feel" for what is occurring down in the line, but they are blind and so is everyone else running without a jet camera. Putting a Jet Eye on the end of the hose makes an operator and their equipment much more useful. What used to be a 3 pass, full throttle operation can now be accomplished by one pass at half throttle. Less water and fuel consumption adds up fast for those cities on a budget.

Does my combination truck have to be new? Can it be a used truck already in service?
Our technicians can install the system on a new or old combination truck. The best setup for the current offering is a water system of 60 to 50 gallons per minute at most. The hose that carries water to the nozzle is a 3/4" jet hose which limits the flow to a maximum of 60.

Can I install the system myself?
We don't recommend that the end-users install the system themselves at this time. We have the installation down to two days currently and the install cost is minimal.

How long does it take to install?
A normal installation takes 2 days normally. Right now a technician is sent out after the hardware arrives and can install the system with minimal assistance and minor modifications.